Goddess CL 490, Инструкция по эксплуатации

Страница: 38 / 52

ENG
ENG - 38
If the room is too large and the Cleaner can not find the charging base plate immediately
and stop seeking, you may manually return it to the base plate. The method is:
place the Cleaner 1.5m before the base plate, and then press the power switch and MAX
key. Or the Cleaner return near to the base plate and it will automatically find it and begin to
charge.
During fixing the position for the charging base in your household, make sure the distance
between the charging base and the room corner is at least 170 cm.
2. Instructions on the function of keys on the auto charging base plate:
A. Clock function
Press the Clock key to adjust the time of
clock as per the Fig.1.
Press the Clock key for three times and respectively
adjust hour, minute and week.
Press +/- key to adjust the specific parameters. After
setting the time, press the Clock key and the clock
setting is ok. At this time, there is “1” before the time
displayed in the screen.
b. Timing cleaning function
Press the Timing key to set the alarm time, and the Cleaner will automatically work as per
the set specified time with the specific operating methods as the follow:
Press Timing key to set the hour. It can be adjusted by the key +/-.
Press again Timing key to set the minute. It can be adjusted by the key +/-.
Press Timing key for three times and the screen will display OFF. At such time, the alarm
function is off. If you want to turn on alarm, you may press + key, the screen will display ON
and then press again Timing key.
After it displays on for alarm setting, there will be “2” displayed before the time in the screen.
d)
e)
a)
b)
a)
b)
c)
d)