ENG
ENG - 53
T20 VAC ON/OFF button: Press it to stop or activate the operation of suction motor and
sweeper motors.
T21 Docking: Pressing it makes the cleaner return to the docking station for recharging.
MOUNTING AND DISMOUNTING BATTERY
Make sure the cleaner is off before inserting or removing the battery.
Press and pull out the battery door in the direction of the arrows as shown in Fig.1.
Insert / Unplug the battery plug into the socket (please note the direction) as shown
in Fig.2.
Place the battery in the battery reservoir and close the battery door. Make sure the battery
door snap into the slot
Fig. 1
Fig. 2
Battery socket
RECHARGING BATTERY
It takes 8-12 hours to fully recharge the battery.
If the power indication lamp on the control panel is flashing red, it indicates that the battery
needs recharging immediately.
Make sure the cleaner is switched off and the battery is properly mounted.
Plug the d.c end of the adaptor into d.c jack at the side of the cleaner first, and then plug the
a.c end of the adaptor into the a.c power outlet on the wall. (Please connent the adaptor to
the unit first before connecting to the a.c power outlet.) Please refer Fig.3.
The power indication lamp on the control panel will flash green.
The power indication lamp stays green when the battery is fully recharged.
P5
d.c jack
P27 Power indication lamp
P33 Adaptor plug (d. c 24V 500mA)
Fig. 3
10)
11)
1)
2)
3)
4)
1)
2)
3)
4)
5)
6)
Содержание CL 390B
