90
6. START-UP
6.1 INSERTING THE BATTERIES
1.
Open the battery cover on the back of the remote control.
2.
Now insert the batteries (2x AAA I Micro I Type LR03) with the positive and neg-
ative end the right way round as marked in the battery compartment.
3.
Now close the battery cover again.
Recommendation!
If the product is not being used for a prolonged period, please
remove the batteries to prevent acid from leaking in the battery
compartment.
6.2 WALL MOUNTING WITH A VESA MOUNT
If the device is to be permanently mounted in a vehicle or on a wall, please only do
this with an appropriate VESA mount. For this purpose, the device has a standard-
ised mount on the back with a VESA standard of 100 x 100. Use 4 M4 threaded
screws for mounting.
When mounting, make sure that the device is securely fixed to the wall bracket. The
screw length depends on the wall mounting. Always use screws with the correct
length. Do not overtighten the screws as this could cause damage to the TV set and
invalidate your warranty.
6.3 MOUNTING THE STAND
As an alternative to mounting on a wall or in a vehicle, the TV set can also be mount-
ed on a stand. Appropriate mounting screws are included for this. When mounting
the stand, make sure that the screws are not overtightened. Also make sure that
there are no fingers or objects between the two components during mounting. Oth-
erwise there is a risk of crushing. You will need a Phillips screwdriver to fit the screws.
6.4 INITIAL INSTALLATION
Before continuing with the initial installation, please connect the TV set to a suitable
power source. Please use the accessories supplied for this purpose. For the connec-
tion, please observe the safety instructions and information set out under point 3.4.