Clean and inspect GoBone frequently.
Carefully inspect all GoBone components for cracks,
separations and missing pieces before giving to your dog. Check frequently and replace worn or
damaged parts immediately.
Your dog’s safety is your responsibility.
As with any dog toy, we recommend supervised
play until you’re confident that your dog will not destroy GoBone. If you think your dog has
swallowed a GoBone fragment, promptly call your veterinarian.
Multiple dog households.
If you have multiple dogs in your household, only provide GoBone
products for the largest, strongest chewer in the house.
Power chewers.
Although GoBone's exterior is made of tough nylon and TPU,
GoBone is not
recommended for dogs that are power chewers or dogs that can quickly destroy other chew
toys.
Getting Started
Charge GoBone
Connect the GoBone Core to a power source using the included charging cable. You can
charge GoBone from a wall socket using the charging brick your smartphone.
It will take 60-90 minutes for a full charge from a wall socket. The LED will pulse green while
GoBone charges. Once it's fully charged, the LED will turn solid green. When it's low on battery,
the LED will pulse red.
Assemble & Dismantle GoBone
Assemble GoBone
1. SLIDE the fully charged core into the shell. Make sure the Quick Release Button on the
core locks into place in the shell.
2. SLIDE one wheel on each side of the core.
3. PRESS the inside of each wheel with your thumb to lock into place.
4. SQUEEZE the wheels together until you hear the wheels click to secure.
5. PULL on both wheels to make sure they are on securely attached. The wheels will not
slip off if when properly attached.
Dismantle GoBone
1. PRESS the inside of each wheel with your thumb and pull the wheel away from the core
to remove.
2. PRESS the Quick Release Button on the core and slide the core out of the shell.
