6
Variable Steam
Fill the iron with water as described in
“Filling”, page 4 and insert the plug into
the electrical socket.
The steam output can be varied from
low to high by sliding the variable steam
control
. When using the iron at the
bottom of the steam range, the steam
output should be adjusted to the lowest
setting.
The steam facility should only be used
on garments which are suitable for
ironing at the 3 dot setting.
Shot of steam
Press the shot of steam button
to
obtain a burst of extra steam for ironing
out creases in heavy material such as
denim etc.
The shot of steam can be used whilst
dry ironing, providing there is water in the
tank, and the temperature
control is set within the
steam range.
Do not use shot of
steam at temperatures
below the steam range
shown on the control.
Note : For optimum steam quality, do
not operate the shot more than three
times in succession.
Self
cleaning
Self
cleaning
High
Low
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
Features of your iron
Temperature indicator light
The indicator light shows that the iron
is warming up. When the required
temperature is reached the light will go
out and will cycle on-off during operation.
Dry ironing
You can use your iron as a dry iron
only. Make sure the variable steam
control
is set to the lowest position.
Any temperature setting may be used
depending on the garment. The spray
feature may be used provided there is
water in the tank (see filling section). You
do not need to put any water in the tank
when dry ironing only.
Spray
Press the spray button
and aim the
spray of water at stubborn creases. You
can do this whilst dry ironing providing
there is water in the tank. When using the
water spray it may be necessary
to push the button a few times
to get the spray pump primed.
STEAM IRON
31/5/02, 11:47 AM
6
