GO4 VEGA I1 IP CAMERA USER MANUAL
10
Figure 9
2
）
Multipicture change button
If you add multi-devices in chapter 3.4.2 “multi-device setting”, it will connect
other device to display pictures automatically when changing to 4, 9 split screen.
In playing video area, you can select a picture to control audio, talk, record,
snapshot and PTZ control etc.
3
）
Viewing control area
You can control PTZ moving, picture reversal and mirror etc. when viewing video,
and can adjust picture parameters, including resolution, brightness etc.
The camera supports 16 preset points, you can set one place as preset point
when moving the PTZ to a place, also can call the preset point when the camera
move to another place, so the camera can return to set place.
Note:
button can control work mode of IR LED. IR LED has two modes, auto
and forced close. In auto mode the IR LED will power on or off according to
environment light; in forced close mode the IR LED will be always off.
4
）
Setting device parameters
Click
button to enter setting interface, you can set all parameters of the
camera described in chapter 3.2 to 3.5. Only administrator can login to set these
parameters.
3.2 Device information
3.2.1 Device status
The user can check “Device firmware version”,” Web UI version”, “Alias”, “AP
MAC” etc.
3.2.2 Device alias setting
The user can rename the camera for ease of use, i.e “Home”, “Office2” etc.
3.2.3 Device date and time setting
You can enable “Sync with NTP Server” when the device is connected to WAN, but
you need to select correct time zone where the camera is located, otherwise you
have to select“ Sync with PC time”.