Go Power+ ST1520E-S Скачать руководство пользователя страница 6

56 VOLT LITHIUM-ION CORDLESS LINE TRIMMER — ST1520E-S

6

EN

READ ALL INSTRUCTIONS!

READ OPERATOR’S MANUAL

 WARNING:

 To ensure safety and reliability, all repairs 

and replacements should be performed by a qualified 
service technician.

SAFETY SYMBOLS

The purpose of safety symbols is to attract your attention to 

possible dangers. The safety symbols and the explanations 

with them deserve your careful attention and  

understanding. The symbol warnings do not, by themselves, 

eliminate any danger. The instructions and warnings they 

give are no substitutes for proper accident prevention 

measures.

 WARNING: 

Be sure to read and understand all 

safety instructions in this Operator’s Manual, including 
all safety alert symbols such as “

DANGER

,” “

WARNING

,”

 

and “

CAUTION

 

before using this tool. Failure to follow all 

instructions listed below may result in electric shock, fire, 
and/or serious personal injury.

SYMBOL MEANING

 SAFETY ALERT SYMBOL: 

Indicates 

DANGER

WARNING

, or 

CAUTION

, may be used in conjunction with 

other symbols or pictographs.

SAFETY INSTRUCTIONS

This page depicts and describes safety symbols that may 
appear on this product. Read, understand, and follow all 
instructions on the machine before attempting to  
assemble and operate it.

Safety 
Alert

Indicates a potential personal 
injury hazard.

Read 
Operator’s 
Manual

To reduce the risk of injury, user 
must read and understand the 
operator’s manual before using 
this product.

Wear Eye 
Protection

Always wear safety goggles or 
safety glasses with side shields 
and a full face shield when 
operating this product.

Wear 
hearing 
protection

Always wear ear protection 
when operating this product. 

No Cutting 
Blade

Do not install metal or plastic 
cutting blades

Ricochet 
and Keep 
Bystand-
ers Away

Thrown objects can ricochet 
and result in personal injury or 
property damage. Ensure that 
other people and pets remain 
away from the line trimmer 
when it is in use.

15m

Keep By-
standers 
Away

Ensure that other people and 
pets remain at least 15m away 
from the line trimmer when it 
is in use.

XX

NOISE dB 

Noise

Sound pressure level

IPX4

Ingress 
Protection 
Degree

Protection from splashing water

V

Volt

Voltage

Direct 
Current

Type or a characteristic of 
current

n

0

No Load 
Speed

Rotational speed, at no load

... /min Per Minute Revolutions per minute

mm

millimeter Length or size

cm

Centimeter Length or size

GENERAL POWER TOOL SAFETY WARNINGS

 WARNING: 

Read all safety warnings, 

instructions, illustrations and specifications 
provided with this power tool.

 Failure to follow all 

instructions listed below may result in electric shock, fire 
and/or serious injury. 

Save all warnings and instructions for future 
reference.

The term “power tool” in the warnings refers to your 
mains-operated (corded) power tool or battery-operated 
(cordless) power tool.

Содержание Power+ ST1520E-S





















Отзывы: