B l u e B o x
GO Systemelektronik GmbH Faluner Weg 1 24109 Kiel Germany Tel.: +49 431 58080-0
Fax: -58080-11
Page 13 / 96
www.go-sys.de
2 Notes on Operation
Improper handling of electrical devices endangers man and property.
Let carry out the commissioning of the BlueBox only by skilful, trained personnel using appro-
priate tools. Incorrect installation could cause serious faults and errors that may damage the
device.
Keep this manual handy for future reference. Never deliver the BlueBox to other persons without this
manual. The manufacturer is not liable for improper or unintended usage.
This device is designed in accordance with the Low Voltage Directive and the safety regulations for electronic
measurement devices.
The trouble-free operation and reliability can only be assured if you pay attention to the generally applicable
safety measures and special safety instructions in this manual.
•
Before the connection of the Blue Box to the power supply make sure that the labelled BlueBox operating
voltage matches the supply voltage (indicating the areas of power supply).
•
The correct functioning and operational safety of the device can only be ensured, if the ambient condi-
tions that are specified in the section 1.2 "Technical data" are complianced.
•
If the device is transported from a cold to a warm environment condensation may result in a failure of the
function. In this case, wait until the device temperature is at the level of the ambient temperature before a
new start-up.
•
Maintenance and repair work may only be performed by a specialist who is authorized by GO Systemelek-
tronik.
If it is to be assumed that the device can no longer be operated safely, it must be put out of operation and
secured with identification markings against further commissioning.
The safety may be compromised by the device if, for example, the device:
•
has visible damages,
•
no longer works as required,
•
has been stored in improper conditions for a longer time,
•
was exposed to improper transport conditions.
In cases of doubt give notice to GO Systemelektronik GmbH. If necessary send the device to GO Systemelek-
tronik for reparation respectively maintenance.
