Photo #7 & #8
Step-5
Passenger side
Center bracket installation.
Measure from the front fender bolt rearward approximately 49 5/8” and locate the hole in the body pinch mold and
the plastic plug in the rocker panel. Remove the plastic plug from the rocker panel and install 5/16” U-Nuts in the
rocker panel and pinch mold.
Attach one of the C0922 brackets to the rocker panel and pinch mold using the (2)
5/16” x 1” hex bolts, (2) 5/16” lock washers and (2) 5/16” flat washers. Leave the bolts loose for final adjustment.
Photo #9 & #10
Step-6
Passenger side rear bracket installation.
Measure from the front fender bolt rearward approximately 67” and repeat step 5 to install the remaining C0922
bracket.
Step-7
Attach the passenger side step to the front bracket
#9
#10
#7
#8