Go Rhino 3293B, Инструкция по сборке

Страница: 4 / 5

STEP 8. FROM THE FRONT OF THE VEHICLE, PULL UP ON THE BUMPER COVER AND INSERT THE PASSENGER SIDE UPPER
BRACKET THROUGH THE GAP BETWEEN THE COVER AND BUMPER. ATTACH THE UPPER BRACKET TO THE AUXILIARY
BRACKET USING 3/8” X 1
1/4 ” CARRIAGE BOLT, FLAT WASHER AND LOCK NUT. DO NOT TIGHTEN. SEE
DIAGRAM #8
REPEAT THE STEPS TO INSTALL THE DRIVER SIDE UPPER BRACKETS.
3/8” X 1 1/4 ” CARRIAGE BOLT, FLAT
WASHER, LOCK NUT
STEP 9. ATTACH THE GRILLE GUARD ASSEMBLY TO THE LOWER BRACKETS USING 1/2” X 1 1/4” CARRIAGE BOLTS, FLAT
WASHERS AND LOCK NUTS AND TO THE UPPER BRACKETS USING 3/8” X 1 ¼” CARRIAGE BOLTS, FLAT WASHERS AND
LOCK NUTS.
SEE DIAGRAM #9
STEP 10. ALIGN THE GRILLE GUARD ASSEMBLY WITH THE FRONT OF THE VEHICLE AND TIGHTEN ALL ASSEMBLY AND
INSTALLATION NUTS AND BOLTS. SEE DIAGRAM #10
IMPORTANT: CAREFULLY OPEN THE HOOD AND CHECK FOR CLEARANCE BETWEEN THE GRILLE AND GRILLE GUARD TOP
TUBE. IF NECESSARY, LOOSEN THE MOUNTING BRACKETS AND ADJUST.
UPPER
BRACKET
#9
#10
#7
#8
M8 X 40M HEX BOLT &
5/16” FLAT WASHER
AUXILLIARY
UPPER BRACKET
UPPER
BRACKET
LOWER
BRACKET