Page
1
of
5
PARTS LIST
QTY
PART DESCRIPTION
8
¼” X 1” BUTTON HEAD BOLT
4
¼” FLAT WASHER
4
¼” LOCK NUT
8
5/16” X 1” BUTTON HEAD BOLT
8
5/16” FLAT WASHER
8
5/16” LOCK NUT
8
3/8” X 1 1/4” BUTTON HEAD BOLT
4
3/8” X 1 1/4” HEX BOLT
8
3/8” LOCK WASHER
4
3/8” HEX NUT
QTY
PART DESCRIPTION
4
3/8” FLAT WASHER
2
3219) SIDE PLATE
1
3218P) PASSENGER BRUSH GUARD
1
3218D) DRIVER BRUSH GUARD
1
D6P) PASSENGER HEAD LIGHT PROTECTOR
1
D6D) DRIVER HEAD LIGHT PROTECTOR
1
ST3934)
3” X 39 ¾” BOTTOM STEP TUBE
1
CP3219)
39 ¾” CENTER PLATE
1
TT3934)
2” X 39 ¾” TOP TUBE
2
21930) CENTER PLATE BRACKET
ASSEMBLY
READ THE ASSEMBLY AND INSTALLATION INSTRUCTIONS COMPLETELY BEFORE YOU BEGIN.
STEP-1
BEGIN THE ASSEMBLY BY LAYING THE COMPONENTS OUT ON A PROTECTIVE SURFACE.
STEP-2
ATTACH THE (2) CENTER PLATE BRACKETS TO THE CENTER PLATE USING (4) 1/4” X 1” BUTTON HEAD
BOLTS, (4) 1/4” FLAT WASHERS, AND (4) 1/4” LOCK NUTS.
PHOTO #1
STEP-3
POSITION THE GRILLE GUARD SIDE PLATES WITH THE FRONT EDGE DOWN AND THE TOP TUBE, CENTER
PLATE AND BOTTOM STEP TUBE BETWEEN THE SIDE PLATES.
STEP-4
ATTACH THE TOP TUBE TO THE SIDE PLATES USING (2) 3/8” X 1 1/4” HEX BOLTS AND (2) 3/8” LOCK
WASHERS. DO NOT TIGHTEN.
STEP-5
ATTACH THE CENTER PLATE TO THE SIDE PLATES USING (4
) 3/8” X 1 1/4” BUTTON HEAD BOLTS, (4) 3/8” FLAT
WASHERS, (4) 3/8” LOCK WASHERS AND (4) 3/8” HEX NUTS. DO NOT TIGHTEN.
STEP-6
ATTACH THE BOTTOM STEP TUBE TO THE SIDE PLATES USING (4) 3/8” X 1 1/4" BUTTON HEAD BOLTS.
STEP-7
ALIGN THE GRILLE GUARD ASSEMBLY, AND TIGHTEN ALL NUTS AND BOLTS.
STEP-8
POSITION THE DRIVER SIDE BRUSH GUARD UP TO THE GRILLE GUARD ASSEMBLY AND ATTACH THE
BOTTOM OF THE BRUSH GUARD TO THE GRILLE GUARD SIDE PLATE USING (1) 3/8” X 1 ¼” HEX BOLT AND (1) 3/8”
LOCK WASHER. ATTACH THE TOP OF THE BRUSH GUARD TO THE SIDE
PLATE USING (2) 5/16” X 1” BUTTON HEAD
BOLTS, (2) 5/16” FLAT WASHERS AND (2) 5/16” LOCK NUTS. DO NOT TIGHTEN.
STEP-9
ATTACH THE DRIVER SIDE HEAD LIGHT PROTECTOR TO THE BRUSH GUARD USING (2) ¼” X 1” BUTTON
HEAD BOLTS, AND TO THE SIDE PLATE USING (2) 5/16” X 1” BUTTON HEAD BOLTS, (2) 5/16” FLAT WASHERS AND
(2) 5/16” LOCK NUTS. DO NOT TIGHTEN. REPEAT THE STEPS TO INSTALL THE PASSENGER SIDE BRUSH GUARD
AND HEAD LIGHT PROTECTOR.
STEP-10
ALIGN THE GRILLE AND BRUSH GUARD ASSEMBLY, AND TIGHTEN ALL NUTS AND BOLTS.
Installation Instructions (assembly)
3000 Series StepGuard (Grille Guard & Brush Guards) Part Number 3219MB, 3219MC
2010-2016 Dodge Ram 2500HD & 3500HD 2/4WD
(Not compatible with ParkSense® Front Park Assist)
