INSTALLATION INSTRUCTIONS
Step-2
If equipped, remove the fog lights from the OEM bumper.
Step-3
From the back of the Trailine front winch bumper, position one of the factory fog lights so the top of the
lens aligns with notch and the lens protrudes out through the opening in the fog light mounting plate, (FIGURE
3).
Step-4
Assemble and attach the fog light housing to the fog light mounting plate using (3) of the offset mount
clips (3)
¼” x 3/4”
button head
screws, (3) ¼” plastic flat washers, (3) ¼” Lock washers and (3) ¼” hex
nuts,
(FIGURE 3). Repeat step 3 and 4 to install the remaining fog light on the passenger side of the Trailline front
winch bumper.
FIGURE 3
A-B-
C-D
E
Driver Side
OEM Fog Light
Fog Light Mounting plate
