Go Power! TS Kit
Owner’s Manual
2
1. Warnings
Avoid All Electrical Hazards.
Disconnect batteries and electrical system from 120/240 VAC, or
any other power source of electrical power, before attempting to install your
Go Power!
GP-TS Kit
.
Observe proper polarity
throughout the GP-TS Kit installation.
Work Safely.
Do not wear jewellery when working with electrical or mechanical equipment. Use
protective eyewear, gloves and apron when working with batteries or power tools. Use extreme
caution when on ladders or a roof.
Follow the Safety Precautions
of the battery manufacturer. Do not produce sparks when working
in locations where flammable gases or vapours exist. Shield skin and eyes from battery acid. If
skin, eyes or clothing comes in contact with acid rinse thoroughly with water.
*Avoid electrical shock. Make sure all sources (inverter, shore power, generator) are disconnected.
2. Installation Overview
Congratulations on becoming the owner of a GP–TS Kit. Please read and understand all
instructions before installing your new product for the easiest and safest installation. Before
installing kit, review the installation design with this DC Kit Installation Manual. Contact your
Authorized GP Dealer if in doubt as to this kit's suitability or compatibility with your system. Retain
this guide for future reference.
Figure 1 - Go Power! Transfer Switch
ON
1
Inverter
Main panel
Converter
Shore power
120 V
30 A
Disconnect
Plug in
these
Battery
Charger
Instant switch “On”
25-30 Sec Delay “1”
Connections to
be made by
customer
Ground
Rev 2
GP-TS Install Guide.doc