WARNING: Many Go-Ped® service and repair tasks require special knowledge
and tools. Do not begin any adjustments, service, or repair on your Power Rack
if you have the slightest doubt about your ability to properly complete them.
Improper adjustments, service, or repair may result in damage to the Power
Rack, and/or an unsafe condition.
WARNING: Any modification of this unit voids the warranty, including but not
limited to, using either wheels or tires not recommended by PMW, attempting to
enhance the speed, range or performance of the unit, and/or equipping the mo-
tor with non PMW drive components. Such modifications can create DANGER-
OUS AND HAZARDOUS conditions.
If you insist on doing adjustments, service or repair, ask your authorized Go-Ped® dealer if a
service manual and any specialized tools are available. It is also a good idea to have an autho-
rized Go-Ped® dealer check the quality of your work before you ride just to make sure you did
everything correctly.
Section 5: Controls
CAUTION: Before you ride - Familiarize yourself with how your equipment works.
•
Red button on the throttle powers on and off the GoBike® Power Rack.
•
Rotating the motor up by hand will allow the motor to lock free disengage from the wheel.
•
To reengage the motor flick the latch hook away from the stud and motor will drop to engage with
the wheel.
•
Thumb lever controls speed and power to the motor.
•
Use the supplied power cord and standard power wall outlet to charge.
•
Always use both hands on the handle bar, when riding.
WARNING: The GoBike® Power Rack outlined in this manual uses a friction
drive system. Keep clear of rear wheel and its drive components when the Power
Rack is installed or severe injury may occur.
Section 6: Maintenance and Parts
CAUTION: Technological advances have made the GoBike® Power Rack and
the components more complex then ever. This on going evolution makes it im-
possible for this manual to provide all the information required to properly re-
pair and or maintain your Power Rack. In order to help minimize the chances of
an accident and possible injury, it is critical that you have any repair or mainte-
nance which is not specifically described in this manual performed by an autho-
rized Go-Ped® dealer.
It is just as important that your individual maintenance requirements will be determined by
everything from your riding style to geographic location. Consult your authorized Go-Ped® dealer
for help with determining your individual maintenance requirements.
Batteries
Your GoBike® Power rack uses an internal Li-Ion polymer battery pack. The battery pan is
a factory sealed unit and should only be serviced by an authorized Go-Ped® dealer. The
battery will last a long time when properly maintained. These batteries do not have
“memory” so it is OK to only partially discharge them before recharging them.
See Battery care and maintenance see Section 4.3
