Go-On SCID133106D/994058, Руководство пользователя

Страница: 18 / 19

8
Don’t apply big pressure to the machine.
The hammer mechanism is activated by applying a slight pressure on the tool when the drill bit is
in contact with the workpiece.
Best hammer drilling results can be obtained by only a slight pressure on the tool needed to keep
the automatic clutch engaged; drilling performance will not improve by applying more pressure on
the tool.
APPLICATION ADVICE
Always use the auxiliary handles provided with this tool. Well controlled machine may
increase the working precision greatly.
The depth gauge can make sure the user drill precisely to a preset depth.
When drilling ferrous metals
- pre-drill a smaller hole, when a large hole is required
- lubricate drill bit occasionally with oil
When turning in a screw at/near the cross cut end or an edge of wood, pre-drill a hole in order to
avoid cracking of the wood.
MAINTENANCE
Keep the ventilation openings clear and clean the product regularly.
If something unusual occurs during use, switch off the supply and disconnect the plug. Inspect
and repair the tool before using it again.
Repair of the tool must only be carried out by a qualified repair technician.
Repair or maintenance by unqualified personnel can lead to a risk of injury.
Use only identical spare parts for repairing a tool.
Care and cleaning
Clean the housing only with a damp cloth-do not uses any solvents! Dry thoroughly afterwards.
STORING
Store the machine, operating instructions and where necessary the accessories in the original
packaging. In this way you will always have all the information and parts ready to hand.
Pack the device well or use the original packaging in order to avoid transit damage.
Always keep the machine in dry place.
DISPOSAL
Do not dispose of power tools into household waste! According the European Guideline
2002/96/EC for Waste Electrical and Electronic Equipment and its implementation into
national right, power tools that are no longer usable must be collected separately and
disposed of in an environmentally correct manner.