Original instruction manual
En
32 03/2017
11. Ensure the appliance is switched off before connecting to
the mains power supply.
12. Switch off the power supply and disconnect from mains
supply when not in use, before cleaning or other
maintenance.
13. To disconnect the appliance, switch it “OFF”, and then
remove the plug from outlet. Do not pull the cord to
disconnect the plug.
14. Do not operate in areas where gasoline, paint or other
flammable liquids are used or stored.
15. Indoor use only.
16. To prevent a possible fire, do not block air intakes or
exhaust in any manner.
17. Don’t touch the hot surfaces.
18. Do not insert or allow foreign objects to enter any
ventilation or exhaust opening, as this may cause an electric
shock, fire or damage to the appliance.
19. Always ensure that hands are dry before operating or
adjusting any switch on the product or touching the plug and
socket-outlet.
20. Do not leave this appliance unattended when it’s in use.
21. The most common cause of overheating is deposits of
dust or fluff in the appliance. Ensure these deposits are
removed regularly by disconnect the appliance and vacuum
cleaning air vents and grilles.
22. Do not place the heater on carpet, don’t place the cable
under carpets. Arrange cord away from traffic areas so that it
will not be tripped over.
23. Do not store away until the heater cools down, store the
heater in cool dry location when not in use.
TECHNICAL SPECIFICATIONS
