
Original instruction manual
En
40 03/2017
OPERATION:
•
Connect the appliance to a safety socket.
•
Press on switch to the heating position (I, II or I&II).
DF-200M6-9
0 Off(Stop)
I 700W
II 1300W
I & II
2000W
•
Turn the thermostat knob in the direction of clockwise until
reaching the maximum temperature.
•
Once the room temperature is reached, slowly turn the
thermostat knob in the direction of anticlockwise until you hear a
click and then the heater will stop working.
•
The heater will turn on and off automatically to maintain the
room temperature you have set.
•
Turn the switch to “0” position to switch off the heater.
Unplug the appliance then after.
Tip-Off Safety Device:
This appliance is provided with a safety device which will switch
off the heater in case of accidental tipping off. To reset,
disconnect the plug from the power for a few minutes, remove
the cause of tipping off, then plug the appliance in again. If it still
cannot be reset, ask a qualified technician to check and repair.
Overheat safety device:
Your heater is fitted with a safety device to switches off the
heater in the event of overheating. If the safety device operated,
please turn the heater off, unplug the appliance and let it
completely cool, inspect for blockage of air inlet or outlet,
attempting to restart the heater then after.
If the heater fails to operate or the safety device switches the
heater off again, return heater to your nearest service center for
examination or repair.