General Attaching
Information
General instructions for attaching the gogo Kidz®
Travelmate to your car seat.
PLEASE SEE ASSEMBLY AND ATTACHING GUIDE FOR
STEP BY STEP INSTRUCIONS
Most car seats have two ribs that go from top to bottom on the back
of the car seat with a space between them. The handle area on
the back of the gogo Kidz plate goes between the ribs in the space
with the smooth, front side of the plate facing out.
Align the two support tabs on the bottom of the gogo Kidz plate at
the bottom of the ribs to help support the car seat.
Lay the gogo Kidz plate on the back of the car seat. The wheels
should be able to rotate freely.
Use appropriate attachment (i.e. short or long strap, retainer bar or
j-bolts) and fasten to the plate and car seat.
NOTE:
Some car seats do not have these two long ribs in the back. For
these types of seats, the support tabs on the bottom of the gogo Kidz
should be located underneath the base itself.
NOTE:
You may be required to move the bar on the back that adjusts
shoulder straps to allow the handle to sit properly.
NOTE:
The seat recline angle may have to be adjusted to make room for
the support tabs or the wheels on some seats.
Attach the tether strap to the handle of the gogo Kidz plate to
ensure the gogo Kidz is secure.
RECOMMENDED CAR SEATS
The gogo Kidz® Travelmate will accommodate most convertible
and toddler car seats. Please refer to the list of recommended car
seats, located on the back page, to ensure a safe fi t. Go-Go Babyz
is continually testing new seats with the gogo Kidz and will update
our web site frequently whenever we discover a new match or to
confi rm which seats will not fi t with the gogo Kidz. If you do not see
your car seat listed on the product box or manual, please check our
web site to see if we have had to opportunity to test it with the gogo
Kidz.
GENERAL INFORMATION FOR ATTACHING THE GOGO KIDZ TO A CAR SEAT
6
Attaching the tether clip to the
gogo Kidz
Arrows pointing to support tabs
Arrows pointing to car seat ribs
