11
12, 6, 9 thrEE-EYE chronograph - 1/10 sEc (cont)
SPlIt tIMe MeASUReMent:
1. PRESS pusher A to start timing
2. PRESS pusher B to ‘split’
3. PRESS pusher B to begin again
4. PRESS pusher A to stop
5. PRESS pusher B to reset
TIMINg 2 CoMPETIToRS:
1. PRESS pusher A to start timing of 1st event
2. PRESS pusher B to stop timing of 1st event; stopwatch continues to run internally
3. PRESS pusher A to start timing of 2nd event
4. PRESS pusher B to view time of 2nd event
5. PRESS pusher B to reset
Mechanical / Automatic Movements
autoMatic/datE
TIME CoRRECTIoN
Unscrew and pull the crown to position 3. The second hand will stop. To
adjust it to the second, place the second hand on 12. Set the hands to the
correct hour and minute.
dATE CoRRECTIoN
Unscrew and pull the crown and pull out to position 2. Turn it clockwise until
the displayed date is correct. Then, push back the crown to position 1 and
screw down tightly to the case.
WINdINg
The Gc Automatic is equipped with a high-quality mechanism with automatic winding. With the slightest
movement of your wrist, a silent rotor conveys power to the spring. When it is fully wound, the minimum power
reserve is 38 hours. If the watch is not used during a certain time, we recommend winding your Gc Automatic
manually by means of winding the crown in position 1.
autoMatic/chronograph
teChnICAl SPeCIfICAtIonS
the gc automatic chronograph features:
-A Valjoux 7750 Chronograph movement with 28,800 vibrations per hour and 25 jewels
-A 42-hour power reserve indicator
TIME CoRRECTIoN
Unscrew and pull the crown to position 3. The second hand will stop.
To adjust it to the second, place the second hand at 12. Set the hands to the correct hour and minute.
dATE CoRRECTIoN
Unscrew and pull the crown to position 2. Turn it clockwise until the displayed date is correct. Then, push back
the crown to position 1 and screw down tightly to the case.
1 2 3
