11
Oil Fill Use:
Non Detergent
Pressure
Regulator
Knob
Oil Sight Gauge
(On Back Plate)
Read complete manual for full details.
www.gncindustries.com
Quick Reference
Initial Set-Up
Set Engine Switch to “ON”
Check Pump Regulator Setting:
Large Red Knob—Set to “START” Position
Small Black Knob—Set to “PRESSURE RELEASE”
Pull Engine Cord—after Engine is started
Set Regulator Knob to Desired PSI
Set Regulator Valve - To “SPRAYING”
Start Spraying, if Needed Review Calibration Section in Your
Owners Manual.
Check Pump and Engine Oil Levels
Check Engine Gas Level—Add Fuel as Needed
Check Engine Gas Shut Off— Set to Open Position
Check Engine Throttle—Set to Full Throttle (Rabbit)
Check Pump Regulator Setting:
Large Red Knob—Set to “START” Position
Operations
Secure Pulley Bolt
to Key Way with
Blue Lock Tight
1” Suction
3/4” Return
Pressure
Release
Output to
Reel
Gauge
