GNATUS COBRA CONTRA ANGLE INTRA 32 CA Скачать руководство пользователя страница 11

11

Coupling to the micromotor

Ensure that the connection of the instrument is compatible with that of the equipment. In order 

to couple it, press the instrument on the coupling of the micromotor until it is fastened (fig. a). To 

uncouple, by means of pressure, pull out the Handpiece.

Before putting it into operation for the first time, follow lubrication procedures (see page 14).

OPERATION OF EQUIPMENT

fig. a

fig. a

fig. b

fig. c

fig. c

fig. b

fig. d

Warning 

Never place or remove the instrument when the micromotor is functioning.

Warning 

Make sure that the bur is fitted up to 

the end for a proper fixing (fig. d). Use 

standardized  burs  of  a  good  quality. 

Burs with very long shanks can produce 

excessive vibration reducing the useful 

life of the bearings.

Fastening of Bur type lock blade (32 CA / SL 30)

Fastening of Bur type Push Button (32 CA PB / 32 CA PB SPRAY / SL 30 PB)

Turn the lever in a counterclockwise direction (fig. a).

Insert the bur in the hole and turn it until locking on the limiter (fig. b).

Upon touching the limiter with the bur turn the lever to the start direction to lock the bur (fig. c).

On  PB  (Push  Button)  system,  fit  the  bur  into 

the guide and turn it until it locks on limitator 

(fig. c). Then press the head button and move 

the bur until it reaches the end of the limitator, 

releasing the head button (fig. c).

Содержание COBRA CONTRA ANGLE INTRA 32 CA





















Отзывы: