B250-XTS User Manual
PAGE 9
Pairing with a Phone
Keep headset and phone no less than 7 .5 cm (3 in) and no more than 1 m (3 ft) apart
while pairing .
Keep other Bluetooth devices at least 15 m (50 ft) away, or turn them off .
NOTE: The headset can be paired with up to 8 different devices but can only be
connected to one at a time. It can only switch back and forth between 2 devices in
Multipoint Mode.
• Turn headset off .
• Hold down the headset’s MFB until the lights alternate red and blue or you hear the
audio prompts “Power On” and then “Discovering .”
IMPORTANT: Wait for both audio
prompts or the alternating blue and red lights. This may take up to 10 seconds. Then
release the MFB.
• Put your cellular phone into Bluetooth Search/Scan Mode per the manufacturer’s
instructions .
• Wait while the devices discover each other: This could take up to 2 minutes . Once
the phone discovers the headset, select “Pair” on the phone and enter a pass code of
“0000” if instructed . Once pairing is complete the alternating lights will stop flashing
and the phone may prompt you to connect to the headset . Select “Yes” on the
phone to connect to the headset . When connected, you will hear the voice prompt,
“Your headset is connected,” and the blue light will flash indicating that the headset
is in Standby Mode and is ready to make or receive calls .
PAIRING
