GMX Mini e-Quad, Инструкция по сборке

Страница: 8 / 25

FAILURE TO USE COMMON SENSE AND HEED THE ABOVE WARNINGS INCREASES RISK OF SERIOUS INJURY. USE WITH
APPROPRIATE CAUTION AND SERIOUS ATTENTION TO SAFE OPERATION.
WARNING:
DO NOT USE NON-GMX PRODUCTS WITH YOUR GMX Product. The GMX Mini e-Quad Bike has been built to certain GMX design
specifications. The original equipment supplied at the time of sale was selected on the basis of its compatibility with the frame,
fork and all other parts. Certain aftermarket products may or may not be compatible.
MAKE SURE POWER SWITCH IS TURNED “OFF” BEFORE CONDUCTING ANY MAINTENANCE PROCEDURES.
ESTIMATED ASSEMBLY AND SET-UP TIME
Allow up to 30 minutes for assembly.
Allow up to 18 hours for initial charge (see page 3 for charging information).
WARNING:
Failing to properly check, adjust and tighten all bolts can cause you to lose control and crash. Check over the entire vehicle
prior to every use.
ASSEMBLY GUIDE
There be a seperate package with the parts required for assembly. Locate this package to start your assembly.
1. Attaching handlebars – The handlebars will be sitting aside on the top of your GMX E-Quad bike. Place the handlebars in the
correct position and place the ends of the bolts through the bolt holes on the steering arm. Pic. 1
Pic. 1