GMX GMXK150WHI, Инструкция по сборке

Страница: 22 / 56

16
Always wear eye protection (goggles or face shield). You should also wear I gloves, boots, long sleeve shirt or jacket,
and long pants.
BREAK-IN
The first month is the most important in the life of your vehicle. Proper operation during this break-in period will be
helpful for assuring maximum life and performance of your new vehicle. The following guidelines explain proper
break-in procedures.
Maximum Throttle Opening Recommendation
During the first 10 hours of operation, you should always use less than 1/2 throttle opening.
Vary the Engine Rotating Speed
Vary the engine rotating speed during the break-
in period. This allows the parts to "load" and then “unload” (allowing
the parts to cool). Although it is to place some stress on the engine components during break-in, you munt be careful
not to load the engine too much.
Avoid Constant Low Rotating Speed
Operating the engine at constant low rotating speed (light load) can cause parts to glaze and not seal properly. Allow
the engine to accelerate freely without exceeding the maximum throttle limit.
Allow the Engine Oil to Circulate Before Riding
Allow enough idling time after warm or cold engine starting. This allows the lubricating oil to reach all critical engine