1. Remove strapping.
2. Remove tape and open the box.
3. Remove the box from the protective framing.
4. Using a screwdriver and a spanner remove the bolts from the framing.
5. Using a Wire cutter, remove the rear wheel steadying wire.
6. Using a wire cutter, remove the front wheel steadying wire.
7. Using a wire cutter, remove the fork steadying wire
8. Whilst steadying the bike remove the protective frame
(2 people minimum).
UNPACKING AND ASSEMBLY INSTRUCTIONS
9. Engage the side stand for the bike.
10. Using an Allen key and a spanner remove the
handle bar “block” from the fork assembly.
11. Remove the protective membrane from the fork
assembly.
12. Lift handlebar into correct position and fasten bolts
