GMR STENSBALLE/NESBO FF/LA, Руководство пользователя

Страница: 19 / 36

GMR maskiner a/s Page 19
STENSBALLE / NESBO sweepers
User manual
GB
• Lower the brush line (see “Indstilling af børstetryk”, page 17).
• Check that the brush line is the same across the machine width. If
this is not the case, the two bolts (Point 1) are not aligned.
Repeat points 1 to 4.
Adjusting brush pressure
(Point 4):
The tractor operator swings the sweeper to one side. Check the brush
line again. If it is not the same across the entire machine width, the
pivot joint is not vertical. The top bar should be adjusted.
Repeat points 1-5.
The closer the brush line is to the ground, the lower the brush pressure.
Adjusting brush pressure
(Point 5):
CAUTION
Damage to brush and machine parts
Brush pressure must not be set so hard that the brush
line is more than 100 mm above the ground.
WARNING
Safety zone
When releasing brush pressure once the machine
is operating, always maintain a safe distance of
min. 5 m from the machine.
Basic settings