Page 7
General Machine Products
(KT), LLC
Note: It is important that after maintenance, the tubular frame is restored to its operat-
ing position and that the clips A are securely fitted.
Note: When the machine is to be lifted using the balanced lifting point C, it is important
to ensure that the clips A are in place and securely fitted.
TROUBLESHOOTING GUIDE
Engine Will Not Start
Check gas level
Check throttle in "on" position
Check emergency stop button is "reset" on either the Tornado or the Powered Duct
Rod Pusher
Ensure hoses are connected from power pack to blower (if they are not connected or
have a faulty coupling, engine will not turn over).
Contaminated gas
Difficult to Start Engine
Check above points
Ensure gas has additional additive
Engine may be flooded
Check hydraulic valve on blower unit is switched “off”
Check spark plug
Engine is Running Erratic
Ensure additive is mixed with gas
Damage to throttle
SPARES
For spare parts always provide the part number and serial number.
General Machine Products
(KT), LLC
3111 Old Lincoln Highway, Trevose PA 19053 USA
TEL:
+1 215 357 5500
●
FAX:
+1 215 357 6216
●
E-MAIL:
Website:
www.GMPtools.com
Please give as much information as possible to ensure correct identification and
supply of spare parts
