
Quick Start Guide
Congratulations on the purchase of your RedPort wXa appliance. With RedPort you will
increase satellite data transfer efficiency and decrease airtime costs while preventing
unwanted costly transmissions. We are confident that RedPort will serve you well. The
following information will get you up and running quickly. Please refer to the RedPort
wXa user guide for additional information.
Port Definitions
• ETH0 is configured as the LAN port with IP address 192.168.10.1.
ETH1 is configured as WAN with DHCP and should be connected to your primary satellite unit.
• ETH2 is configured as WAN2 with DHCP and should be connected to your backup satellite unit.
• WLAN is configured as the WiFi port (on units with WiFi) with IP address 192.168.20.1.
WiFi Hotspot
• Protocol: 802.11g (a and b are disabled by default)
• Security: WPA2 (WPA and WEP disabled by default)
• SSID:
webXaccelerator
• Secret:
webXaccelerator
• WiFi IP: 192.168.20.1
Router Administrative Page
• IP: 192.168.10.1 - Use a web browser and URL
http://192.168.10.1
on the LAN port
or via WiFi.
• user: admin
• password: webxaccess