STEP 1
Lay RIGHT leg on the floor (see part identification on p.1).
Attach the front brace, rear brace & modesty panel to the leg.
Braces must be oriented as shown below. Use two 1/4-20 x
1/2" Flange Head Bolts for the modesty panel & two 1/4-20 x 1/2"
Flange Head Bolts for each brace.
Secure the Keyboard Mounting Bracket between the front &
rear brace. Use 1/4-20 x 1/2" Flange Head Bolts.
Slide the wire tray onto the top lip of the modesty panel.
Hinge
VIEW 2
(From Top)
VIEW 1
(From Bottom)
Hinge
STEP 2
Set one reference & one drafting top beside the
partially assembled base as shown to the right.
Wood nut inserts facing up. Grommet hole toward
the back of the station.
Wood Nut Insert
Side Up
STEP 1
