S
TEP 2
WARNING!
THIS RACK MUST
BE FLOOR/WALL
ANCHORED
S
TEP 3
Upright Brace - Length Varies
Assemble the upright brace to the upright as shown using the (4 per brace) 3/8” x 4” Hex Bolts and 3/8” Nylock Nuts.
There should be (2) braces per bay opening. Length varies on length of rack
ordered.
Continue assembling upright braces between upright assemblies until rack is complete.
Move rack into position and anchor to floor/wall. Distribute loads evenly on shelves for best stability.
Note: When two sets of braces share one upright, one set of bolts will be used to
connect both braces to the shared upright.
