GMCR-Standard Rack - ASSEMBLY INSTRUCTIONS
Components
Single Sided Upright
Double Sided Upright
Upright Brace Support
Straight Shelf Arm
Incline Shelf Arm
Base Side Plates
Upright - Length Varies
Front Plate
Upright
Assembly
STEP 1
Assemble side plates to rack upright using (2) 3/8” x 4“ and (4) 3/8” x 1” Hex Bolts and 3/8” nylock nuts.
Attach the front plate to the two side plates as shown using (4) 3/8” x 1” Hex Bolts and 3/8” nylock nuts.
Attach shelf arms to uprights using the (1 per arm) 3/8” x 4 “ in the desired position.
Mount wall bracket to upright using (2) 3/8” x 4“ Hex Bolts. Position
as necessary to fasten to secure wall.
Attach the angled retainer plate to the front plate as
shown in Fig.1 using (1) 3/8”x1” Hex head bolt and nylock
nut.
The height and width of the upright will vary with the size of rack ordered. Assembly concept is the same
for all units. Double sided racks will have the base side plates with the mount holes for the uprights centered.
Double sided racks will require two front plates per upright assembly.
Wall Bracket
Shelf Arm
Fig.1
