GMI GDUnet, Руководство пользователя

Страница: 50 / 122

USER HANDBOOK
3-24
Fig. 3-32 Edit Methane Conversion Factor
2. Select button to store updated value, if no further
‘advanced editing’ is required.
3.4.4 Edit Purge Time
This feature normally applies to automatic calibration only.
1. To edit the purge time (in seconds), select radio button
adjacent to panel displaying time value, as illustrated in Fig.
3-33. Use up / down arrows to increase / decrease purge time
value respectively.
Value can be set from 0 to 120 seconds.
Fig. 3-33 Edit Purge Time
2. Select button to store updated value, if no further
‘advanced editing’ is required.
Note: A longer purge time ensures all the gas is cleared
from the instrument.