EL-277 ASSEMBLY INSTRUCTIONS
TOOLS REQUIRED FOR ASSEMBLY
Electric Hand Drill, Phillips Head Bit, 3/8" Crescent
Wrench, Tape Measure.
BEFORE ASSEMBLING THE RACK
Read through the assembly instructions to familiarize
yourself with the order in which the parts are
assembled.
We suggest that you clear & vacuum the area where
the rack is to be assembled.
It is important that the rack is assembled in the same
sequence as instructed.
HARDWARE
All assembly hardware is provided. Floor anchor
hardware is not provided.
WARNING!
THIS RACK MUST
BE FLOOR
ANCHORED
