GMI D6072D, Инструкция по эксплуатации, Страница: 3 / 9

D6072 - SIL 2 Multifunction Temperature Converter G.M. International ISM0216-5
3
Ordering Information
Front Panel and Features

SIL 2 according to IEC 61508:2010 (Route 2H) with Tproof = 10 / 20 years ( ≤ 10% / >10 % of total SIF), for analog current source/sink output.

SIL 2 according to IEC 61508:2010 (Route 2H) with Tproof = 9 / 20 years ( ≤ 10% / >10 % of total SIF), for alarm output.

SC 3: Systematic Capability SIL 3.

Installation in Zone 2 / Division 2.

mV, thermocouple, 2 or 3 or 4 wire resistance/RTD or transmitting potentiometer Input Signal.

2-wire RTD line resistance compensation.

Internal Reference Junction Compensation.

Fastest integration time: 50 ms.

Fully customizable Output range from 0 to 24 mA Output Signal linear or reverse (typical 0/4-20 mA).

Output duplication possible for D6072D.

Modbus RTU RS-485 Output.

Independent multiple Fault detection.

Programmable alarm available on solid state contact output or Termination Board connector.

High Accuracy, µP controlled A/D converter.

Three port isolation, Input/Output/Supply.

EMC Compatibility to EN61000-6-2, EN61000-6-4, EN61326-1, EN61326-3-1 for safety system.

Fully programmable operating parameters.

ATEX, IECEx Certifications (pending).

UL & C-UL, TÜV Certifications.

High Density, two channels per unit.

Simplified installation using standard DIN-Rail and plug-in terminal blocks, with or without Power Bus, or customized Termination Boards.

Data logging and monitoring via software.
D6072S: +Input for thermocouple TC or for 3, 4 wire RTD or potentiometer
D6072D: +Input Ch1 for thermocouple TC or for 3 wire RTD or potentiometer
Terminal block connections
D6072S: -Input for thermocouple TC or for 2, 3, 4 wire RTD or potentiometer
D6072D: -Input Ch1 for thermocouple TC or for 2, 3 wire RTD or potentiometer
D6072S: Input for 2, 3, 4 wire RTD or potentiometer
D6072D: Input Ch1 for 2, 3 wire RTD or potentiometer
D6072S: Input for 4 wire RTD
D6072D: Input Ch2 for 2, 3 wire RTD or potentiometer
D6072D: +Input Ch2 for thermocouple TC or for 3 wire RTD or potentiometer
D6072D: -Input Ch2 for thermocouple TC or for 2, 3 wire RTD or potentiometer
7
8
9
10
11
12
D6072S, D6072D (Ch1): +Output Ch1 (source current mode) or
-Output Ch1 (sink current mode)
1
D6072S, D6072D (Ch1): -Output Ch1 (source current mode) or
+Output Ch1 (sink current mode)
2
Model: D6072
1 channel S
2 channels D
Power Bus and DIN-Rail accessories:
Connector JDFT049
Cover and fix MCHP196
Terminal block male MOR017 Terminal block female MOR022
D6072S (Alarm), D6072D (Current/Alarm): +Output Ch2 (source current) or
-Output Ch2 (sink current) or +Output (Alarm/Fault)
3
D6072S (Alarm), D6072D (Current/Alarm): -Output Ch2 (source current) or
+Output Ch2 (sink current) or -Output (Alarm/Fault)
4
+Power Supply 24 Vdc
5
-Power Supply 24 Vdc
6
7 8
9 10
11 12
2
1
4 3
6 5