Page 15
GMG 2646E-OR --- 4646E-OR
Operator’s manual
Series: 2646
E-OR
--- 4646
E-OR
November 2020 #81250.1
8IWX8LI)QIVKIRG]0S[IVMRK
14. Activate the UP function and raise the platform approximately 60 cm.
15. Pull the red EMERGENCY LOWERING knob, found at the back of the machine above the step.
Result: The platform should lower. The descent alarm will not sound.
%Ǎ8ǁƾ4DžƺǍƿLjNjdž'LjLJǍNjLjDžnj
16. Turn the KEY SWITCH to platform controls.
8ƾnjǍ)džƾNjǀƾLJƼǒ7ǍLjlj
17. Push in the platform EMERGENCY STOP button to the off position.
No functions should operate.
18. Pull the EMERGENCY STOP button out to the on position.
The LED indicator light should come on.
8ƾnjǍ8ǁƾ,LjNjLJ
19. Push the HORN BUTTON.
The horn should sound.
Check the area above and around the machine for obstructions and electrical
power lines before operating the machine.
8ƾnjǍ*ǎLJƼǍǂLjLJ)LJƺƻDžƾƺLJƽ94(LjǐLJ*ǎLJƼǍǂLjLJnj
20. Activate the Lift functions by pressing the LIFT-FUNCTION BUTTON.
One pressed - the LED centred in this button will lit up.
21. Slowly move the CONTROL HANDLE forward and following reverse - not holding the Enable
switch on the control handle.
No functions should operate.
22. Press and hold the FUNCTION ENABLE SWITCH on the control handle.
23. Slowly move the CONTROL HANDLE reverse.
The platform should raise. Releasing the control handle should stop the function.
24. Press and hold the FUNCTION ENABLE SWITCH. Slowly push the control handle forward.
The platform should lower. The descent alarm should sound while the platform is lowering.
Emergency Lower
Knob
Forward
Reverse
Lift
Lower
Interlock
Steer
GMG
GMG
