GME TX630 Скачать руководство пользователя страница 12

SPECIFICATIONS

WARRANTY

       

   

GENERAL:

 

Frequency Range: 

 476.425 - 477.400 MHz

       

Channel Spacing: 

 25 kHz 

       

CTCSS Codes: 

 38 

       

Dimensions (W x H x D): 

 62 mm x 98 mm x 30 mm

       

 

 (Without Antenna)

    POWER SUPPLY:

 

Power Source: 

 Li-ion rechargeable - 7.4 V DC, 1000 mAh

       

Operating Time: 

 10 Hours (High Power) 

       

 

 (Transmit 5%, Receive 5%, Standby 90%)

    RECEIVER:

 

Usable Sensitivity: 

 -121 dBm 

 

       

Maximum Audio Output: 

 >0.3 Watt max. (8 Ohm)

       

Modulation Distortion: 

 <5% (1 kHz 70%)

    TRANSMITTER:

 

RF Output Power: 

 Low: 1.0 Watt

       

 

 High: 2 Watts.

       

Maximum Deviation: 

 +/- 5 kHz.

       

Modulation Distortion: 

 <5% (1 kHz. 70%

)

 

Specifications are subject to change without notice or obligation.

GME limit this warranty to the original purchaser 
of the equipment.
GME warrant the TX630 to be free from defects in 
material and workmanship for a period of twelve 
(12) months from the date of purchase from their 
authorised dealer.
GME warrant the TX630 Battery Pack to be free 
from defects in material and workmanship for 
a period of three (3) months from the date of 
purchase from their authorised Dealer.
Should the product require servicing during this 
period, all labour and parts used to effect repairs 
will be supplied free of charge. GME reserve the 
right to determine whether damage has been 
occasioned by accident, misuse or improper 
installation whereby the warranty would be void, 
including:
Transceivers which have been damaged due to:
1.   Incorrect or reverse polarity connection to  

a battery or power supply.

2.  Connection to an incorrect supply voltage.
3.   Operation without an antenna or by 

connection to an antenna which has been

  incorrectly installed, resulting in damage to  
  the transceiver’s output circuit.
4.   Effects of water or moisture penetration.
5.   Non-factory modifications.
Procedure to be followed by claimant: In the event 
of a defect occurring during the warranty period, 
the original Purchaser may return the defective 
unit along with suitable proof of purchase date 
(i.e. receipt, docket, credit card slip etc.) and a 
full description of the defect to the Dealer from 
whom the unit was purchased. All freight charges 
incurred for transportation by the Dealer or GME 
are the Purchaser’s responsibility.

GME after sales service

Your transceiver is especially designed for the 
environment encountered in portable applications. 
The use of all solid state circuitry, careful design 
and rigorous testing, result in high reliability. 
Should failure occur however, GME maintain a 
fully equipped service facility and spare parts stock 
to meet the customer’s requirements long after 
expiry of the warranty period.

Drawing Number: 42316-4  Part Number: 310231

  

 

 

 

 

Содержание TX630













Отзывы: