t X 3 5 0 0
I n s t r u c t I o n m A n uA l
PA G E 1 3
Mounting the Cradle
Fitting the Radio
slide radio fully into cradle until it clicks into place.
Removing the Radio
Fitting the Microphone
the microphone uses a miniature 6 pin telephone style plug
which fits the tX3500’s microphone socket. the tX3500
has two microphone sockets – one on the front panel and
one on the rear panel. the microphone can be plugged into
either socket. If connecting the microphone to the rear socket,
an optional extension cable lEm6P is available to bring the
microphone connection to a more accessible location.
To fit the Microphone: Front
1. the front microphone cover is a press fit. to remove, simply
insert the end of a paper clip or similar into the small slot in
the edge of the cover and lift the cover away from the panel.
2. Place the microphone plug so the plastic tab faces
downwards, then press plug into the socket until it ‘clicks’.
3. Gently press the rubber strain relief into the hole
surrounding the socket so that the slot around the strain
relief fits neatly inside the lip of the hole.
lift panel here
