manualshive.com logo in svg

GME MC522BC LCD Microphone, Инструкция по эксплуатации

Поделиться
Скачать
GME MC522BC LCD Microphone Скачать руководство пользователя страница 21

TX3600 SERIES 

INSTRUCTION MANUAL 

PAGE 21

Fitting MC522BC Microphone

Screw the LCD Controller Microphone and the clip to a 
firm surface. Position the LCD Controller Microphone in its 
mounting clip. Finally, plug the LCD Controller Microphone 
into the front panel. An additional 1.8 m extension cable is 

supplied to allow more remote mounting of the main unit.

Fitting the Radio

Slide radio fully into cradle until it clicks into place.

Removing the Radio

Fitting the Microphone

The microphone uses a miniature 6 pin telephone style plug 

and socket. To fit the microphone:

1.   Position the microphone plug so the plastic tab faces 

downwards. Press the plug into the socket until 

 

it ‘clicks’.

2.   Gently press the rubber strain relief into the hole 

surrounding the socket so that the slot around the strain 

relief fits neatly inside the lip of the hole.

removing the microphone

1.   Squeeze the rubber strain relief near the front panel to 

disengage the slot, and slide the strain relief back along 

the microphone cord.

2.   Squeeze the plastic tab on the microphone plug towards 

the plug to unlock it while gently pulling the plug 

outwards. If the plug does not come out easily, the tab 
has not released correctly and should be squeezed again.

Console Mounting the TX3600 Series

For console mounting, a flush mounting DIN Adaptor 
MBD001 is available as an optional accessory. The adaptor 
includes mounting brackets and a specially designed 

front panel escutcheon to suit most vehicle installations. 

Installation instructions are provided with the bracket. 

 

See your nearest GME retailer for details.

din adaptor MBd001

Gently 
spread 
tabs

Slide Radio 
from cradle

Fitting Mic to 
front panel

Fitting MC522BC  
to TX3600 Series

MC522BC

Slide Microphone  
into the mounting clip

Gently 
spread 
tabs

Содержание MC522BC LCD Microphone

























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды