or
VOL
buttons) to restore the output volume to
normal levels.
7
Press the
PWR
button to turn the GR968 ON or OFF.
8
Press the
SEL
button briefly to select the next available
control. The options available are Volume, Bass, Treble,
Balance and Fader.
- Press and hold the
SEL
button for 2 seconds. In this
mode you can apply a beep to all, secondary or none of
the buttons using the
VOL
and
VOL
buttons.
- In MP3 mode, the
SEL
button is used to select the
letter or number of the file or directory you are
searching for.
9
Press the
BND/LOU
button briefly to set the frequency
band to F1, F2, F3 or MW (AM).
- Press and hold the
BND/LOU
button for 2 seconds
to turn the loudness function on. Repeat to turn the
loudness function off again.
- In MP3 mode, the
BND/LOU
button is used as the
ENTER
button to confirm the file or directory you are
searching for.
10
Press the
EQ
(Equalisation) button briefly to select the
desired audio mode. The options available are Flat,
Classics, Pop M, Rock M, and DSP (Audio Digital Signal
Processor) Off.
11
In radio mode, press the
AMS
button briefly to step
through the stations in the preset memories, pausing
briefly on each station.
- Press and hold the
AMS
button for 2 seconds to
automatically locate and store the 6 strongest local
stations on the selected band into the preset
station memories.
- In MP3 mode, press the
AMS
button to search for a
specific file or directory.
12
Press the
PAU
(pause) button briefly to pause the CD or
MP3. Press this button again to resume playing the CD
or MP3.
13
Press the
SCN
(scan) button to play the first 10 seconds
of each track on the CD or MP3.
14
The
RPT
(repeat) button causes the current track on the
CD or MP3 to be played repeatedly.
15
Press the
SHF
(shuffle) button to play all the tracks on
the CD or MP3 in random order.
16
Buttons
1
to
6
are used to store and access preset
station memories.
- To store a preset station in memory, select the required
station, then press and hold the preset memory button
for 2 seconds.
- To recall a station from the preset memory, press a
preset memory button briefly.
- In MP3 mode, these buttons are used for searching for
files or directories.
17
The
MOD
button allows you to switch between Radio
mode and CD mode or Radio mode and MP3 mode.
- In MP3 mode, press the MOD button to search for a
specific file or directory.
18
&
19
and
tune buttons. In radio mode, the
tune buttons are used to automatically tune the radio
to the next clear station. Press the
tune button to
decrease the frequency and
tune button to increase
the frequency. Press and hold
or
for 2 seconds
to manually tune to the desired frequency.
- In CD mode, press the
button to step backwards
to the previous track or
button to advance to the
next track. Press and hold the
button to retrace
the current track at high speed or
to advance
forward through the current track at high speed.
When advancing or retracing the current track, the
music can be heard playing at high speed in the
speakers so that you can monitor its progress.
- In MP3 mode, the
and
tune buttons are used
for searching for files or directories.
20
Press the button to stop and eject the CD. The unit
automatically returns to radio mode.
REMOVING AND REFITTING THE FACE PANEL
Removal
Before removing the face panel, turn
the
unit OFF by pressing the
PWR
button.
1. Press the release button to
release the left hand end of the
face panel.
2. Lift the face panel out towards you.
After removing the face panel,
place it inside the supplied case
to protect it from damage. Do not
leave it in a position where it could
be exposed to direct sunlight.
Содержание GR968
Страница 1: ......
Страница 2: ...FEATURES CONTENTS...
Страница 3: ...PRECAUTIONS CONTROLS Reset Button 1 2 3 5 6...
