G X 8 5 0
i n s t r u c t i o n m a n ua l
2 1
dSC oPeRation
DSC Operation
RACE1
Disable
Enable
Exit Enter
DSC Operation
RACE1
My MMSI ID
DSC Function
Exit Enter
My MMSi id
this option duplicates the ‘my mmsi iD’ option in the Dsc
menu. Either option can be used to set the user mmsi in the
GX850.
dSC Function
selecting ‘Dsc Function’ allows the Dsc feature to be
completely disabled on the radio. when the Dsc function is
disabled, the Dsc menu normally accessed via the menu key
is no longer available.
to enable or disable the Dsc Function
1. select Dsc Function in the Dsc operation menu.
2. select
enable
or
disable
. You will be asked ‘are you sure’.
3. select
yes
or
no
.
System Configuration
Systen Config
LCDBackLight
BackLight Time
LCDContrast
Key Beep
Version Info
Factory Reset
Exit Enter
lCd BaCKliGht
select ‘lcD Backlight’ to adjust the brightness of the display
backlight. the brightness can be adjusted from 0 (min) to
9 (max). use the
key to increase the brightness or the
key to decrease the brightness.
Press
enter
to accept or
exit
to cancel.
BaCKliGht tiMe
select ‘Backlight time’ to adjust the length of time (in
seconds) before the backlight extinguishes after a key press.
the time can be adjusted from 0 (no backlight) to 9 seconds.
use the
key to increase the time or the
key to
decrease the time.
lCd ContRaSt
select ‘lcD contrast’ to adjust the contrast of the display.
the contrast can be adjusted from 0 (min) to 9 (max). use the
key to increase the contrast or the
key to decrease
the contrast.
Key BeeP
select ‘Key Beep’ to set the volume of the beeps that will be
heard when a key is pressed. choose from off, Quiet, middle
or loud then press
enter
. the new Beep volume setting will
be applied and a ‘tick’ will appear adjacent to the selected
setting. once the preferred setting is ticked, press
exit
to
return to the menu.
