background image

1 8  

I N S T R U C T I O N   M A N UA L  

 

G X 4 0 0

SPECIFICATIONS* 

GENERAL

 

Complies with:

 AS4367:2007

 

Frequency Range:

  26 – 30 MHz

 

Channel Set:

  Australian 27 MHz CB (26.965 – 27.405 MHz)

 

  Australian Marine (27.680 – 27.980 MHz)

 Modulation:

  AM (A3E)

 

Supply Voltage:

  

• 12 V DC nominal

 

  • 10.8 – 15.6 V DC range

 

Frequency Error:  

±1.4 kHz

 

Dual Watch:

  Monitor time – 250 ms

 

Scan Rate:

  5 channels/second

TRANSMITTER

 

Max Modulation Depth:

    100%

 

Carrier Output Power:

    4 watts max

 

Spurious Emissions:

  < – 26 dBm

RECEIVER

 

Receive Sensitivity for 12 dB  

 

SINAD @ 30%Modulation:

  – 110 dBm

 

Max Squelch:

  < – 65 dBm

 

Adjacent Channel Selectivity:

  

≥ 55 dB

 

Spurious Response Immunity:

  ≥ 55 dB

 

Conducted Spurious Radiation

  ≤ – 57 dBm 

 

Audio Output Power 8 Ohms:

  2.5 watts

 

MECHANICAL 

 

Dimensions:

  65 (H) x 75 (D) x 164 (W) mm

 

Weight:

 602 grams

ENVIRONMENTAL

 

Temperature Range:

  – 0°C to + 55°C

The GX400 will operate over the 26 – 30 MHz frequency range. For information specific to 
frequencies outside of the Australian Marine or the Australian and New Zealand CB bands, 
please refer to the appropriate amendment, or contact GME at: [email protected]

*All specifications are typical and subject to change without notice or obligation.

Содержание G-COM GX400





















Отзывы: