MT610G
24
DEACTIVATING THE MT610G
The steps below explain how to deactivate or turn off your PLB.
1.
Press and hold the
On/Off
button for more than 5 seconds.
2.
The red and green LEDs will flash together to indicate that your PLB
has been deactivated.
The PLB will now be turned off, and all visual alerts will cease.
NOTE
: In case of accidental activation, follow the steps below:
- Deactivate your PLB, as described in the section above.
- Notify your nearest RCC (Rescue Coordination Centre) of accidental
activation.
IN CASE OF UNSUCCESSFUL DEACTIVATION:
If your PLB does not deactivate the first time, repeat the deactivation process.
In the event that deactivation fails the second time round, proceed with the
following steps to permanently disable the PLB:
1.
Open the PLB by removing the 4 retaining screws at the rear of the
device. Note: The screws are under the ‘anti-tamper’ plastic plugs.
2.
Separate the two parts (top and bottom) of the PLB plastic case to
access the battery area.
3.
Remove the battery.
Contact the GME service team for technical support.
