Global Mainstream Dynamic Energy Technology Ltd.
- 34 -
User Manual
GHESS 3.7-4.8-SL hybrid system
Figure 40 Operation mode setting
MDE refers to operation mode. The MDE code 0000refers to self-use mode, 01 refers to
time-of-use mode. The default value is 00 and press “OK” to modify it.
If modify MDE value into 01 as shown in Figure 41, press “OK” the system will enter the charging
time range setting interface as shown in figure 42. For example, if you want the system start to
charge the battery at 22.00 and stop charging at 5.00 next morning, then please set the digits
on figure 43, as “22:00”, “05:00” respectively. The charging current is the same as the Ic that has
been set in Section 4.1.5.7.
Press “OK” to enter into the discharging time range setting interface as shown in Figure 43. Like
setting the charging time range as above, if to discharge the battery from 8am to 5pm(17:00)
every day, then please set the digits on Figure 43 as “08:00”,”17:00” . The discharging current is
the same as the Id current that has been set in 4.1.5.6.
WAIT
KW
KW
KW
KW
KW
KWh
INVERTER EXPERT
EOUT
MDE
Figure 41 Time-of-use mode setting
8.8.8
8.8.8
8.8.8
8.8.8
8.8.8
8
8.8.8.8
2088-08-
88
88:88
WAIT
KW
KW
K
W
KW
KW
KW
h
INVERTER EXPERT
EOU
T
0 0
2 2.0
0
0 5.0
0
Figure 42 Charging time range setting under time-of-use operation mode
