background image

4

The Keyless Access System enables operation of the doors, ignition and liftgate without 

removing the Remote Keyless Entry transmitter from your pocket or purse . The transmitter 

must be within 3 feet of the door being unlocked or within 3 feet of the liftgate.

KEYLESS UNLOCKING

With the transmitter within range:

  Press the lock button on the driver’s door handle to unlock the 

driver’s door; press it again within 5 seconds to unlock all doors . 

  Press the lock button on a passenger door handle to unlock 

all doors . 

  Press the touchpad on the liftgate handle to open the liftgate . 

KEYLESS LOCKING

With the ignition off, the transmitter removed from the vehicle, and all doors closed: 

  Press the lock button on any door handle to lock all doors immediately . 
  If Passive Locking is turned on, all doors will lock automatically after a short delay . 

Note: 

To change the keyless locking and unlocking settings, go to Settings > Vehicle > Remote 

Lock, Unlock, Start.

 Lock

Press to lock all 

doors . 

 Unlock 

Press to unlock the 

driver’s door . Press 

again to unlock all 

doors .

Power Liftgate

F

Press twice to open or 

close the liftgate . Press 

once to stop power liftgate operation . 

 Vehicle Locator/Panic Alarm 

Press and release to locate your vehicle . 

The exterior lamps will flash and the horn 

will sound .
Press and hold to activate the alarm . Press 

again to cancel the alarm .

Note: 

To change the remote settings, go to 

Settings > Vehicle > Remote Lock, Unlock, 

Start.

 Remote Vehicle Start

F

Press and release the   Lock button and 

then immediately press and hold the   but-

ton until the turn signal lamps flash to start 

the engine from outside the vehicle . After 

entering the vehicle, turn on the ignition . 
•  During a remote start, the engine will run 

for 15 minutes . Repeat these steps to run 

the engine for an additional 15 minutes . 

A remote start can be extended once .

•  Press and hold the   button until 

the parking lamps turn off to cancel a 

remote start .

Remote Start Auto Heated/Ventilated 

Seats

F

:

Select the Remote Start Auto Heat Seats 

or Remote Start Auto Cool Seats option in 

the Vehicle Settings to have the heated or 

ventilated seats turn on during a remote 

start . The seat button indicators do not illu-

minate and the temperature performance 

of the unoccupied seats may be reduced 

during a remote start .

KEYLESS ACCESS SYSTEM

 See Keys, Doors and Windows in your Owner’s Manual .

F

 

Optional equipment

REMOTE KEYLESS ENTRY TRANSMITTER

See Keys, Doors and Windows in your Owner’s Manual .

Содержание TERRAIN 2019





















Отзывы: