GMC Sierra Denali Classic 2007, Руководство пользователя

Страница: 146 / 502

•
L
Windshield Washer. See Windshield
Washer on page 148 .
•
I
Cruise Control. See Cruise Control on
page 149 .
For information on the headlamps, see Headlamps
on page 152 .
Turn and Lane-Change Signals
The turn signal has two upward (for right) and
two downward (for left) positions. These positions
allow you to signal a turn or a lane change.
To signal a turn, move the lever all the way up or
down. When the turn is finished, the lever will
return automatically.
To signal a lane change, just raise or lower the
lever until the arrow starts to flash. Hold it
there until you complete your lane change. The
lever will return by itself when you release it.
An arrow on the
instrument panel cluster
will flash in the
direction of the turn or
lane change.
As you signal a turn or a lane change, if the
arrows flash more quickly than normal, a signal
bulb may be burned out and other drivers
won’t see your turn signal.
If a bulb is burned out, replace it to help avoid an
accident. If the arrows don’t go on at all when
you signal a turn, check for burned-out bulbs and
a blown fuse. See
Fuses and Circuit Breakers
on page 436 .
Turn Signal On Chime
If your turn signal is left on for more than 3/4 of a
mile (1.2 km), a chime will sound at each flash
of the turn signal and the message TURN SIGNAL
ON will also appear in the DIC. To turn the
chime and message off, move the turn signal lever
to the off position.
146