GMC Savana Owner Manual (GMNA-Localizing-U.S./Canada-9159232) -
2016 - crc - 6/17/15
Instruments and Controls
121
2 MINUTES :
The exterior lamps will
stay on for two minutes.
NO CHANGE :
No change will be
made to this feature. The current
setting will remain.
To select a setting, press
V
while
the desired setting is displayed on
the DIC.
APPROACH LIGHTING
This feature allows you to select
whether or not to have the exterior
lamps turn on briefly during low light
periods after unlocking the vehicle
using the Remote Keyless
Entry (RKE) transmitter.
Press
U
until APPROACH
LIGHTING appears on the DIC
display. Press
V
once to access the
settings for this feature. Then
press
U
to scroll through the
following settings:
OFF :
The exterior lamps will not
turn on when you unlock the vehicle
with the RKE transmitter.
ON (default) :
If it is dark enough
outside, the exterior lamps will turn
on briefly when you unlock the
vehicle with the RKE transmitter.
The lamps will remain on for
20 seconds or until
Q
on the RKE
transmitter is pressed, or the vehicle
is no longer off. See
Remote
Keyless Entry (RKE) System
Operation
0
25
.
NO CHANGE :
No change will be
made to this feature. The current
setting will remain.
To select a setting, press
V
while
the desired setting is displayed on
the DIC.
CHIME VOLUME
This feature allows you to select the
volume level of the chime.
Press
U
until CHIME VOLUME
appears on the DIC display.
Press
V
once to access the settings
for this feature. Then press
U
to
scroll through the following settings:
NORMAL :
The chime volume will
be set to a normal level.
LOUD :
The chime volume will be
set to a loud level.
NO CHANGE :
No change will be
made to this feature. The current
setting will remain.
There is no default for chime
volume. The volume will stay at the
last known setting.
To select a setting, press
V
while
the desired setting is displayed on
the DIC.
FACTORY SETTINGS
This feature allows you to set all of
the customization features back to
their factory default settings.
Press
U
until FACTORY SETTINGS
appears on the DIC display.
Press
V
once to access the settings
for this feature. Then press
U
to
scroll through the following settings:
RESTORE ALL (default) :
The
customization features will be set to
their factory default settings.
DO NOT RESTORE :
The
customization features will not be
set to their factory default settings.