2. Use a spatula or similar instrument to apply the grease
into the gearbox cavity. Be careful not to scratch or
otherwise damage the mechanism.
3. Replace the cover.
CAUTION.
Do not over-tighten
the cover (5) or overfill the
gearbox with grease. If you run
out of grease, or are not sure
how to change the grease, please
take your product to the nearest
authorised service centre and
have a qualified person replace
the grease.
Cleaning
1. Keep your machine and its cord clean. The outside of
the machine can be cleaned using a damp soft cloth
with a mild detergent if required.
2. Some maintenance products and solvents may damage
the plastic parts; these include products containing
benzene, trichloroethylene, chloride and ammonia.
3. Excessive sparking generally indicates the presence
of dirt in the motor or abnormal wear on the carbon
brushes.
4. Take special care to keep the ventilation inlets/outlets
free from obstruction; cleaning with a soft brush will
usually be sufficient to ensure acceptable internal
cleanliness.
5. Wear eye protection when carrying out cleaning.
CAUTION.
Do not use cleaning agents to clean the plastic
parts of the drill.
Power cord maintenance
If the supply cord needs replacing, the task must be
carried out by the manufacturer, the manufacturer’s
agent, or an authorised service centre in order to avoid
a safety hazard.
11
