GMC MX100MAG Скачать руководство пользователя страница 10

Страница: 10 / 12

Lubrication

The grease in the gearbox will require replacement after

extensive use of the tool. Please go to a qualified service

agent to perform this service.

Power cord maintenance

If the supply cord needs replacing, the task must be carried

out by the manufacturer, the manufacturer’s agent, or an

authorised service centre in order to avoid a safety hazard.

Cleaning

1. Keep the tool’s air vents unclogged and clean at all

times.

2. Remove dust and dirt regularly. Cleaning is best done

with a rag. Wear safety goggles or an eye shield and

gloves whist cleaning.

3. Re-lubricate all moving parts at regular intervals.
4. Never use caustic agents to clean plastic parts.

CAUTION.

Do not use cleaning agents to clean the plastic

parts of the tool. A mild detergent on a damp cloth is

recommended. Water must never come into contact with

the tool.

General inspection

Regularly check that all the fixing screws are tight, particularly

the outer flange. They may vibrate loose over time.

Содержание MX100MAG













Результаты поиска

Содержание MX100MAG

Отзывы:

Похожие инструкции для MX100MAG

Бренды по названию

Популярные бренды

GMC MX100MAG, Инструкция по эксплуатации

Результаты поиска

Содержание MX100MAG

Отзывы:

Похожие инструкции для MX100MAG

Бренды по названию

Популярные бренды