Dear Customer
If you require any help with your product, whether it is a
Warranty claim, spare part or user information:
please phone our Help Line for an immediate response.
The appropriate number is given on the rear page of this
manual.
Introduction
Your new GMC power tool will more than satisfy your
expectations. It has been manufactured under stringent
GMC Quality Standards to meet superior performance
criteria.
You will find your new tool easy and safe to operate, and,
with proper care, it will give you many years of
dependable service.
Caution.
Carefully read through this entire Instruction
Manual before using your new GMC Power Tool. Take
special care to heed the Cautions and Warnings.
Your GMC power tool has many features that will make
you job faster and easier. Safety performance and
dependability have been given top priority to the
development of this tool, making it easy to maintain and
operate.
Environmental protection
Recycle unwanted materials instead of
disposing of them as waste. All tools, hoses
and packaging should be sorted, taken to the
local recycling centre and disposed of in an
environmentally safe way.
Symbols
The rating plate on your tool may show symbols. These
represent important information about the product or
instructions on its use.
Wear hearing protection.
Wear eye protection.
Wear breathing protection.
Double insulated
for additional protection.
Conforms to relevant
safety standards.
Specifications
Voltage:
230–240V ~ 50 Hz
Power rating:
920W
No load speed:
800–3000/min
Stroke length:
23mm
Cutting angle range:
0–45°
Cutting depth in:
Wood
85mm
Steel
8mm
This jigsaw is double insulated. There are two independent
barriers of insulation to protect you from the possibility of
electric shock.
The sound intensity level for the operator may exceed 85
dB(A) and sound protection measures are necessary.
Safety rules for laser lights
The laser light/laser radiation used in the GMC LightSabre
system is Class 2 with maximum 1mW and 400nm–
700nm wavelengths. These lasers do not normally present
an optical hazard, although staring at the beam may
cause flash blindness.
Warning.
Do not stare directly at the laser beam.
A hazard may exist if you deliberately stare into the
3
