For enquiries or support: visit
or contact us on 012-661-1173
5
NOTE:
1. Do not block the drainage port or water pipe.
2. Do not fold the water pipe or make it 250mm higher than the bottom of unit.
3. Do not replace the rubber adapt or of the water pipe, it’s a special accessory for the unit
only, any other adaptor may not fit the unit. If it’s damaged or lost, please call the
customer service for replacement on 012-661-1173 or
.
4. The humidity level can be set within a range of 80% RH (Relative Humidity) to 35% RH
(Relative Humidity) in 5% reduce or at CO for continuous operation.NOTE: If CO
(Continuous) is selected, the dehumidifier will operate continuously at its maximum
dehumidification settings if attached to a hose to drain or until the bucket is full.
5. For drier air, press the - pad and set to a lower percent value (%).For damper air, press
the +pad and set to a higher percent value (%).When you first use the dehumidifier, set
he humidity control to 45% or 50%. Allow at least 24 hours for the dehumidifier to
achieve the humidity level. If you still have damper air than desired, set the humidity
level to a lower setting or select Continuous
for maximum dehumidification
.
